Published Papers - YOSHIHARA Nobuhito

Characteristics of high-speed reciprocation profile grinding

Nobuhito Yoshihara, Hiromasa Kano and Masahiro Mizuno

Advances in Abrasive Technology XXVI     2024.11  [Refereed]

Bulletin of University, Institute, etc.  Multiple authorship

Estimation of Grinding Conditions by Machine Learning

Nobuhito Yoshihara, Daiki Kobayashi, Kudai Matsumoto and Masahiro Mizuno

Advances in Abrasive Technology XXV     2023.12  [Refereed]

Bulletin of University, Institute, etc.  Multiple authorship

Optimization of Nano-topography Distribution by Compensation Grinding

N. Yoshihara, M. Mizuno

International Journal of Automation Technology   16 ( 1 ) 32 - 37   2022.01  [Refereed]

Academic Journal  Multiple authorship

Effect of the abrasive grain distribution on ground surface roughness

N. Yoshihara, H. Takahashi, M. Mizuno

International Journal of Automation Technology   16 ( 1 ) 38 - 42   2022.01  [Refereed]

Academic Journal  Multiple authorship

Roughness of Traverse Ground Surface

Nobuhito Yoshihara

Advanced Micro-Fabrication and Green Technology     2020.08  [Refereed]

Others  Single Work

Effect of the grinding efficiency on ground surface roughness

Nobuhito Yoshihara, Masaki Ono, Naohiro Nishikawa, Masahiro Mizuno

Advances in Abrasive Technology   22   2019.12  [Refereed]

Others  Multiple authorship

Burr suppression effect in ultrasonic vibration-assisted drilling of SUS316

Kyosuke Taguchi, Nobuhito Yoshihara, Keisuke Hara, Masahiro Mizuno

Journal of the Japan Society for Abrasive Technology   63 ( 12 ) 624 - 629   2019.12  [Refereed]

International Conference Proceedings  Multiple authorship

Study on ultrasonic vibration assisted drilling of AISI 316 2nd report effect of ultrasonic vibration on the cutting temperature

Kyosuke Taguchi, Nobuhito Yoshihara, Keisuke Hara, Masahiro Mizuno

Advances in Abrasive Technology   21   2018.10  [Refereed]

Others  Multiple authorship

Comparison of machining performance between cutting tap and rolled tap in tapping of Inconel 718 superalloy

Masahiro Mizuno, Yuma Koseki, Nobuhito Yoshihara, Naohiro Nishikawa, Toshirou Iyama

Advances in Abrasive Technology   21   2018.10  [Refereed]

Others  Multiple authorship

Effect of the abrasive grain distribution on surface roughness

Nobuhito Yoshihara, Masaki Ono, NaohiroNishikawa, Masahiro Mizuno

Advances in Abrasive Technology   21   2018.10  [Refereed]

Others  Multiple authorship

Study on ultrasonic vibration assisted drilling of SUS316

Kyosuke Taguchi, Keisuke Hara, Nobuhito Yoshihara, Masahiro Mizuno

Advances in Abrasive Technology   20   489 - 494   2017.12  [Refereed]

Academic Journal  Multiple authorship

Theoretical analysis of roughness of high-speed reciprocation ground surface

Nobuhito Yoshihara, Kazuki Ono, Naohiro Nishikawa, Masahiro Mizuno

Advances in Abrasive Technology   20   217 - 221   2017.12  [Refereed]

Academic Journal  Multiple authorship

Grinding Characteristics of Waspaloy with High-Speed Reciprocation Grinding

Nobuhito Yoshihara, Yuta Fukuda, Masatsugu Houman, Naohiro Nishikawa, Masahiro Mizuno

Materials Science Forum   ( 874 ) 97 - 100   2016.10  [Refereed]

Academic Journal  Multiple authorship

Development of a New Truing Device Based on Electro-Contact Discharge Machining for Metal Bond Grinding Wheels

Masahiro Mizuno, Akira Karibe, Nobuhito Yoshihara, Naohiro Nishikawa, Toshirou Iyama

Materials Science Forum   ( 874 ) 268 - 271   2016.10  [Refereed]

Academic Journal  Multiple authorship

Development of the Electric Rust Preventive Machining Method System -New Generation System for High Performance Water Machining and Green Manufacturing-

Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno and Shinya Tsukamoto

Proceedings of the 8th MIRAI Conference     98 - 103   2015.03  [Refereed]

Others  Multiple authorship

Development of electric rust preventive machining method system – safe water using for machining fluid: complete removal of bacteria (Legionella pneumophila) and assay

N. Nishikawa, K. Omoe, K. Murakami, Y. Sato’o, T. Sawa, Y. Hagihara, N. Yoshihara, H. Okawai, T. Iyama, M. Mizuno, S. Tsukamoto

International Journal of Nanomanufacturing   10 ( 1/2 ) 185 - 200   2014.10  [Refereed]

Academic Journal  Multiple authorship

Optimization of Grinding Conditions in Non-axisymmetric Aspherical Grinding

Nobuhito Yoshihara, Tomoharu Nakagawa, Naohiro Nishikawa and Masahiro Mizuno

Advanced Materials Research   1017   109 - 103   2014.08  [Refereed]

Academic Journal  Multiple authorship

Development of Electric Rust Preventive Machining Method System -Image analysis and calculation on Particle Removal for Recycling Water-

Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno, Toshirou Iyama and Shinya Tsukamoto

Proceedings of ICPE2014     478 - 483   2014.07  [Refereed]

Others  Multiple authorship

Grinding characteristics of high-speed reciprocation profile grinding

Nobuhito Yoshihara, Kyohei Horoya, Naohiro Nishikawa, Masahiro Mizuno and Toshirou Iyama

Proceedings of the 7th International Conference on Leading Edge Manufacturing in 21st Century   7   519 - 522   2013.11  [Refereed]

Others  Multiple authorship

Development of an Innovative Water Machining System Employing the Electric Rust Preventive Method -Precise Evaluation of Purity of the Refined Water with a Laser Turbidity Meter-

Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto

Advanced Materials Research   797   293 - 298   2013.09  [Refereed]

Academic Journal  Multiple authorship

Optimal strategies for corrective assembly approach applied to a high-quality relay production system

Toshirou Iyama, Masahiro Mizuno, Kenneth N. McKay, Nobuhito Yoshihara, Naohiro Nishikawa

Computers in Industry   64 ( 5 ) 556 - 564   2013.06  [Refereed]

Academic Journal  Multiple authorship

Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria (Enterobacter aerogenes) -

N. Nishikawa, K. Omoe, K. Murakami, Y. Sato, T. Sawa, Y. Hagihara, N. Yoshihara, H. Okawai, T. Iyama, M. Mizuno, S. Tsukamoto

International Journal of Precision Engineering and Manufacturing   14 ( 6 ) 897 - 902   2013.06  [Refereed]

Academic Journal  Multiple authorship

Lapping of EDM-processed V-Groove Array Using Three-dimensional Tool Motion

M.Mizuno, N.Sato, T.Iyama, N. Yoshihara, N.Nishikawa

Conference proceedings of euspen   2   96 - 100   2013.05  [Refereed]

Others  Multiple authorship

Development of Electric Rust Preventive Machining Method –Optimization of Water Recycle System–

N Nishikawa, Y Sato, F Andou, T Sawa, Y Hagihara, H Kato, N Yoshihara, H Okawai, T Murase, T Iyama, M Mizuno and S Tsukamoto

Key Engineering Materials   523-524   973 - 978   2012.11  [Refereed]

Academic Journal  Multiple authorship

Development of Electric Rust Preventive Machining Method –Improvement of Electric Rust Preventive Chip Sedimentation System–

N Nishikawa, Y Sato, F Andou, T Sawa, Y Hagihara, H Kato, N Yoshihara, H Okawai, T Murase, T Iyama, M Mizuno and S Tsukamoto

Key Engineering Materials   523-524   979 - 984   2012.11  [Refereed]

Academic Journal  Multiple authorship

Effect of the grain depth of cut on cross sectional profile –Theoretical analysis of ground surface roughness–

Nobuhito Yoshihara, Hiroaki Murakami, Naohiro Nishikawa, Masahiro Mizuno and Toshirou Iyama

Advanced Materials Research   565   28 - 33   2012.09  [Refereed]

Academic Journal  Multiple authorship

Application of electric rust preventive machining method - Removal of contaminants from machining water -

Naohiro NISHIKAWA, Yoshinori SATO, Keita KUDOU, Takatoshi MURASE, Yoshihiro HAGIHARA, Nobuhito YOSHIHARA, Hiromasa KATO, Hiroaki OKAWAI, Kiyotaka KARITA, Toshiro IYAMA, Masahiro MIZUNO and Shinya TSUKAMOTO

Jornal of the Japan Society for Abrasive Technology   56 ( 2 ) 102 - 107   2012.02  [Refereed]

International Conference Proceedings  Multiple authorship

High Efficiency Precision Surface Grinding of Fused Sillica

Peng Yao, Yadong Gong, Suoxian Yuan, Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Advanced Materials Research   418-420   1132 - 1136   2011.12  [Refereed]

Academic Journal  Multiple authorship

Development of Electric Rust Preventive Machining Method- Correspond to Difference of Water in World: Use of Adjusted Synthesized Water-

N Nishikawa, Y Sato, K Kudo, T Murase, T Sawa, H Kato, N Yoshihara, H Okawai, K Karita, T Iyama, M Mizuno and S Tsukamoto

Advanced Materials Research   497   373 - 381   2011.11  [Refereed]

Academic Journal  Multiple authorship

Development of Electric Rust Preventive Machining Method- Correspond to Difference of Water in World: Use of Deionized Refined Water-

N Nishikawa, Y Sato, K Kudo, T Murase, T Sawa, H Kato, N Yoshihara, H Okawai, K Karita, T Iyama, M Mizuno and S Tsukamoto

Advanced Materials Research   497   365 - 372   2011.11  [Refereed]

Academic Journal  Multiple authorship

Roughness of high-speed reciprocation profile ground surface

Nobuhito YOSHIHARA, Kyohei HOROYA, Naohiro NISHIKAWA, Masahiro MIZUNO and Toshirou IYAMA

Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century   - CD-ROM   2011.11  [Refereed]

Others  Multiple authorship

Development of electric rust preventive machining method -Evaluation of influence on rust prevention with water of different region-

Naohiro NISHIKAWA, Yoshinori SATO, Keita KUDO, Takatoshi MURASE, Yoshihiro HAGIHARA, Nobuhito YOSHIHARA, Hiromasa KATO, Hiroaki OKAWAI, Kiyotaka KARITA, Toshiro IYAMA, Masahiro MIZUNO and Shinya TSUKAMOTO

Journal of the Japan Society for Abrasive Technology   55 ( 11 ) 656 - 661   2011.11  [Refereed]

Academic Journal  Multiple authorship

Laser-assisted powder jet deposition

Nobuhito Yoshihara, Ryoko Hiromatsu, Koichi Mizutani, Jiwang Yan and Tsunemoto Kuriyagawa

Jornal of the Japan Society for Abrasive Technology   55 ( 10 ) 606 - 610   2011.10  [Refereed]

Academic Journal  Multiple authorship

Development of Electric Rust Preventive Machining Method -Water using for Machining: Improvement of Water Recycle System-

N. Nishikawa, Y. Sato, T. Kato, K. Karita, Y. Hagihara, N. Yoshihara, H. Okawai, H. Kato, T. Iyama, M. Mizuno and S. Tsukamoto

Advanced Material Research   325   699 - 704   2011.09  [Refereed]

Academic Journal  Multiple authorship

Nano-Topography Distribution on Non-Axisymmetric Aspherical Ground Surface

Nobuhito Yoshihara, Shin Fujimura, Naohiro Nishikawa, Masahiro Mizuno and Toshirou Iyama

Advanced Material Research   325   66 - 71   2011.09  [Refereed]

Academic Journal  Multiple authorship

Optimal Strategy for Producing a High Quality Relay in a Machining-assembly Production System Applied a Corrective Assembly Approach

T.Iyama, M.Mizuno, N.Yoshihara, N.Nishikawa

Proceedings of the 11th euspen International Conference   2   265 - 268   2011.05  [Refereed]

Others  Multiple authorship

Optimization of Nano-topography Distribution by Compensation of Grinding Conditions

N.Yoshihara, N.Nishikawa, M.Mizuno, T.Iyama, T.Kuriyagawa

Proceedings of the 11th euspen International Conference   2   208 - 211   2011.05  [Refereed]

Others  Multiple authorship

Lapping of EDM Processed Tool Steel Surfaces Using Modified Figure-8 Tool Motion

M.Mizuno, D.Tanaka, T.Iyama, N.Yoshihara, N.Nishikawa

Proceedings of the 11th euspen International Conference   2   196 - 199   2011.05  [Refereed]

Others  Multiple authorship

Development of electric rust preventive machining method -Verification of the optimized rust prevention current and electrical characteristic with supporting electrode in grinding-

Naohiro NISHIKAWA, Yoshinori SATO, Tasuku KATO, Kiyotaka KARITA, Yoshihiro HAGIHARA, Nobuhito YOSHIHARA, Hiroaki OKAWAI, Hiromasa KATO, Toshirou IYAMA, Masahiro MIZUNO and Shinya TSUKAMOTO

Journal of the Japan Society for Abrasive Technology   55 ( 5 ) 290 - 297   2011.05  [Refereed]

Academic Journal  Multiple authorship

Ultrasonic-assisted grinding of ultra-high purity SUS316L

Keita SHIMADA, Nobuhito YOSHIHARA, Jiwang YAN, Tsunemoto KURIYAGAWA, Yuichiro SUEISHI and Hideshi TEZUKA

International Journal of Automation Technology   5 ( 3 ) 427 - 432   2011.05  [Refereed]

Academic Journal  Multiple authorship

Development of electric rust preventive machining method -Rust prevention of workpiece and machine body-

Naohiro NISHIKAWA, Yoshinori SATO, Tasuku KATO, Kiyotaka KARINO, Toshirou IYAMA, Masahiro MIZUNO, Nobuhito YOSHIHARA, Yoshihiro HAGIHARA and Shinya TSUKAMOTO

Journal of the Japan Society for Abrasive Technology   55 ( 2 ) 167 - 172   2011.02  [Refereed]

Academic Journal  Multiple authorship

Development of electric rust preventive machining -Proposal for a machining water recycling system-

Naohiro NISHIKAWA, Yoshinori SATO, Tasuku KATOU, Kiyotaka KARITA, Toshirou IYAMA, Masahiro MIZUNO, Nobuhito YOSHIHARA, Yoshihiro HAGIHARA and Sinya TSUKAMOTO

Journal of the Japan Society for Abrasive Technology   54 ( 10 ) 603 - 606   2010.10  [Refereed]

Academic Journal  Multiple authorship

Fablicating microgrooves with varied cross-sections by electrodischarge machining

Jiwang Yan, Takuya Kaneko, Kazunori Uchida, Nobuhito Yoshihara, Tsunemoto Kuriyagawa

International Journal of Manufacturing Technology   50 ( 44086 ) 991 - 1002   2010.10  [Refereed]

Academic Journal  Multiple authorship

Study on Nonisothermal Glass Molding Press for Aspherical Lens

Tianfeng ZHOU, Jiwang YAN, Nobuhito YOSHIHARA and Tsunemoto KURIYAGAWA

Journal of Advanced Mechanical Design, Systems, and Manufacturing   4 ( 5 ) 806 - 815   2010.08  [Refereed]

Academic Journal  Multiple authorship

Repairing Damage on Ground Fused Silica by CO2 Laser Irradiation

Peng Yao, Takuro Abe, Nobuhito Yoshihara, Tianfeng Zhou, Jiwang Yan and Tsunemoto Kuriyagawa

Advanced Materials Research   126-128   401 - 406   2010.07  [Refereed]

Academic Journal  Multiple authorship

Effect of Grain Cutting Direction for Ground Surface Roughness -Study on Nonaxisymmetric Aspherical Grinding-

Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Journal of the Japan Society for Precision Engineering   76 ( 7 ) 781 - 785   2010.07  [Refereed]

Academic Journal  Multiple authorship

Ductile and Brittle Mode Grinding of Fused Silica

Peng Yao, Nobuhito Yoshihara, Nobuteru Hitomi, Jiwang Yan and Tsunemoto Kuriyagawa

Key Engineering Materials   447-448   21 - 25   2010.06  [Refereed]

Academic Journal  Multiple authorship

Restoration of the retention force of a small-diameter thermoplastic resin-bonded wheel by laser treatment

Hiroshi MATSUURA, Yasuhiro KUNIEDA, Nobuhito YOSHIHARA, Makoto TANABE, Jiwang YAN and Tsunemoto KURIYAGAWA

Journal of the Japan Society for Abrasive Technology   54 ( 5 ) 282 - 287   2010.05  [Refereed]

Academic Journal  Multiple authorship

Study of Laser Treatment of Abrasive Retention Force for a Thermoplastic Bonded Diamond Wheel by Thermal Processing and Ablation Effect-Direct Irradiation by Multi Mode Optical Fiber for Pulse Laser-

Hiroshi MATSUURA, Yasuhiro KUNIEDA, Nobuhito YOSHIHARA, Makoto TANABE, Jiwang YAN and Tsunemoto KURIYAGAWA

Journal of the Japan Society for Precision Engineering   76 ( 3 ) 327 - 332   2010.03  [Refereed]

Academic Journal  Multiple authorship

Ultrasonic-assisted micro-grinding using electroplated diamond wheels -2nd Report: Effect of ultrasonic vibration on workpiece removal in grinding with wheel end-

Keita Shimada, Takumi Tateishi, Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Journal of the Japan Society for Abrasive Technology   54 ( 1 ) 37 - 40   2010.01  [Refereed]

Academic Journal  Multiple authorship

Performance of the thermoplastic resin-bonded diamond wheel

Hiroshi MATSUURA, Sohei KODAMA, Yasuhiro KUNIEDA, Nobuhito YOSHIHARA, Makoto TANABE, Jiwang YAN and Tsunemoto KURIYAGAWA

Journal of the Japan Society for Abrasive Technology   53 ( 12 ) 756 - 761   2009.12  [Refereed]

Academic Journal  Multiple authorship

Study on Nonisothermal Glass Molding Press for Aspherical Lens

Tianfeng Zhou, Jiwang Yan, Nobuhito Yoshihara and Tsunemoto Kuriyagawa

Proceedings of The 5th International Conference on Leading Edge Manufacturing in 21st Century     431 - 436   2009.12  [Refereed]

Others  Multiple authorship

Optimization of Grinding Conditions Utilizing Nano-topography Distribution Analysis

Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Proceedings of The 5th International Conference on Leading Edge Manufacturing in 21st Century     449 - 452   2009.12  [Refereed]

Others  Multiple authorship

High Efficiency Precision Surface Grinding of Fused Silica

Pemg Yao, Nobuteru Hitomi, Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Proceedings of the 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology   - CD-ROM   2009.11  [Refereed]

Others  Multiple authorship

Development of thermoplastic-resin bonded diamoond wheel and the control of protrusion height by irradiation with laser light using a flashlamp-pumped pulse laser

Hiroshi MATSUURA, Sohei KODAMA, Yasuhiro KUNIEDA, Nobuhito YOSHIHARA, Makoto TANABE, Jiwang YAN and Tsunemoto KURIYAGAWA

Journal of the Japan Society for Abrasive Technology   53 ( 11 ) 679 - 683   2009.11  [Refereed]

Academic Journal  Multiple authorship

Measurement of High-NA Axisymmetric Aspherical Surface with Continuous Interference Method

Y. Nagaike, Tsunemoto Kuriyagawa, Wei Gao, Jiwang Yan and Nobuhito Yoshihara

Key engineering materials   389-390   102 - 107   2009.04  [Refereed]

Academic Journal  Multiple authorship

Control of the behavior of abrasive grains by the effect of electrorheological fluid assistance -Study on electrorheological fluid-assisted micro ultrasonic machining-

T.Tateishi, K.Shimada, N.Yoshihara, J.Yan and T.Kuriyagawa

Advanced Materials Research   76-78   696 - 701   2009.04  [Refereed]

Academic Journal  Multiple authorship

Control of Nano-Topography on an Axisymmetric Ground Surface

Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Key engineering materials   389-390   96 - 101   2009.04  [Refereed]

Academic Journal  Multiple authorship

Effect of Electrorheological fluid assistance on Micro Ultrasonic Machining

Takumi Tateishi, Keita Shimada, Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Advanced Materials Research   69-70   148 - 152   2009.04  [Refereed]

Academic Journal  Multiple authorship

Fabrication of High-Aspect Ratio Micro Holes on Hard Brittle Materials -Study on Electrorheological Fluid-Assisted Micro Ultrasonic Machining-

T. Tateishi, Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Key engineering materials   389-390   264 - 270   2009.04  [Refereed]

Academic Journal  Multiple authorship

Design of Double Nozzle Type Powder Jet Device Optimized for PJD

Toshihiko Shibuya, Mohammad Saeed Sepasy, Koichi Mizutani, Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Key engineering materials   389-390   398 - 403   2009.04  [Refereed]

Academic Journal  Multiple authorship

SHAPE TRANSFERABILITY AND MICROSCOPIC DEFORMATION OF MOLDING DIES IN ASPHERICAL GLASS LENS MOLDING PRESS

Jiwang Yan, Tianfeng Zhou, Nobuhito Yoshihara, Tsunemoto Kuriyagawa

Journal of Manufacturing Technology Research   1 ( 1/2 ) 85 - 101   2009.02  [Refereed]

Academic Journal  Multiple authorship

Fabrication of micro end mills by wire EDM and some micro cutting tests

Jiwang Yan, Kazuyoshi Uchida, Nobuhito Yoshihara and Tsunemoto Kuriyagawa

Journal of Micromechanics and Microengineering   19 ( 025004 ) 1 - 9   2009.01  [Refereed]

Academic Journal  Multiple authorship

Study on Electrorheological Fluid Assisted Micro Ultrasonic Machining

T. Tateishi, N. Yoshihara, J. Yan and T. Kuriyagawa

International Journal of Abrasive Technology   2 ( 1 ) 70 - 82   2009.01  [Refereed]

Academic Journal  Multiple authorship

Characteristics of the hydroxyapatite film deposited on human enamel: deposition of a ceramic film by powder jet deposition technique

Miyoko Noji, Mohammad Saeed Sepasy Zahmaty, Toshihiko Shibuya, Nobuhito Yoshihara, Tsunemoto Kuriyagawa, Keiichi Sasaki and Osamu Suzuki

International Journal of Abrasive Technology   2 ( 1 ) 83 - 96   2009.01  [Refereed]

Academic Journal  Multiple authorship

Ultrasonic-assisted micro-grinding with electroplated diamond wheels

Keita SHIMADA, Takumi TATEISHI, Nobuhito YOSHIHARA, Jiwang YAN and Tsunemoto KURIYAGAWA

Jounal of the Japan Society for Abrasive Technology   53 ( 1 ) 45 - 48   2009.01  [Refereed]

Academic Journal  Multiple authorship

Investigation on the Transferability of Precision Molding Process for Aspherical Glass Lenses

Tianfeng Zhou, Jiwang Yan, Nobuhito Yoshihara, Tsunemoto Kuriyagawa and Jun Masuda

Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing     156 - 161   2008.09  [Refereed]

Others  Multiple authorship

Dose-Dependent Osteogenic Effect of Octacalcium Phosphate on Mouse Bone Marrow Stromal Cells

TAKAHISA ANADA, TAKASHI KUMAGAI, YOSHITOMO HONDA, TAISUKE MASUDA, RYUTARO KAMIJO, SHINJI KAMAKURA, NOBUHITO YOSHIHARA, TSUNEMOTO KURIYAGAWA, HIDETOSHI SHIMAUCHI and OSAMU SUZUKI

TISSUE ENGINEERING: Part A   14 ( 6 ) 965 - 978   2008.04  [Refereed]

Academic Journal  Multiple authorship

Improving the Profile Integrity of Germanium Fresnel Lenses in Micro Grooving Processes

Jiwang Yan, Yufeng Fan, Tsunemoto Kuriyagawa and Nobuhito Yoshihara

Proceedings of The 4th International Conference on Leading Edge Manufacturing in 21st Century     759 - 764   2007.11  [Refereed]

Others  Multiple authorship

Fabrication of Micro Grooves on Hard Brittle Material -Study on Electrorheological Fluid Assisted Ultrasonic Machining-

T. Tateishi, N. Yoshihara, J. Yan and T. Kuriyagawa

Proceedings of The 4th International Conference on Leading Edge Manufacturing in 21st Century     765 - 770   2007.11  [Refereed]

Others  Multiple authorship

Development of an Abrasive Tank Seperated-Type AJM Device -Study on Abrasive Jet Machining-

Nobuhito Yoshihara, Masaru Amaha, Jiwang Yan and Tsunemoto Kuriyagawa

Proceedings of The 10th International Symposium on Advances in Abrasive Technology     599 - 605   2007.09  [Refereed]

Others  Multiple authorship

Study on Powder Jet Deposition -Development of Double Nozzle Type Powder Jet Deposition Devise-

Toshihiko Shibuya, Koichi Mizutani, Nobuhito Yoshihara, Jiwang Yan, Tsunemoto Kuriyagawa and Mohammad Saeed Sepasy Zahmaty

Proceedings of The 10th International Symposium on Advances in Abrasive Technology     655 - 661   2007.09  [Refereed]

Others  Multiple authorship

Numerical Simulation and Prediction of Surface Heterogeneity in Diamond Turning of Single-Crystalline Germanium

Jiwang YAN, Yufeng Fan, Nobuhito Yoshihara, Tsunemoto Kuriyagawa and Shoji Yokoyama

Key Engineering Materials   329   397 - 402   2007.04  [Refereed]

Academic Journal  Multiple authorship

Development of 3R Diamond Wheel by Thermoplastic Resin Bond

Hiroshi Matsuura, Yasuhiro Kunieda, Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Key Engineering Materials   329   459 - 464   2007.04  [Refereed]

Academic Journal  Multiple authorship

Analysis of Stress-induced Birefringence in Nd:YAG Crystal

Hiroshi Matsuura, Yasuhiro Kunieda, Nobuhito Yoshihara and Tsunemoto Kuriyagawa

Key Engineering Materials   329   557 - 562   2007.04  [Refereed]

Academic Journal  Multiple authorship

Grain exfoliation and control thereof in ultra-precision plane honing of AlN substrates

Shinya SUZUKI, Tsunemoto KURIYAGAWA, Jiwang YAN and Nobuhito YOSHIHARA

International Journal of Machining and Machinability of Materials   2 ( 1 ) 37 - 49   2007.04  [Refereed]

Academic Journal  Multiple authorship

Development of a Rubber-Bonded Grinding Wheel ―Studies on Aspherical Grinding―

Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Key Engineering Materials   329   465 - 470   2007.04  [Refereed]

Academic Journal  Multiple authorship

Nano precision on-machine profiling of curved diamond cutting tools using a white-light interferometer

Jiwang Yan, Hiroyasu Baba, Yasuhiro Kunieda, Nobuhito Yoshihara and Tsunemoto Kuriyagawa

International Journal of Surface Science and Engineering   1 ( 4 ) 441 - 455   2007.04  [Refereed]

Academic Journal  Multiple authorship

High-Efficiency Mirror Grinding of AlN by Ultra-Precision Plane Horning

Shinya SUZUKI, Nobuhito YOSHIHARA, Jiwang YAN and Tsunemoto KURIYAGAWA

Key Engineering Materials   329   291 - 296   2007.04  [Refereed]

Academic Journal  Multiple authorship

Electrolytic conditioning of resin-metal-bonded diamond grinding wheels

Nobuhito Yoshihara, Mingxia Ma, Jiwang Yan and Tsunemoto Kuriyagawa

Int. J. Abrasive Technology   1 ( 1 ) 136 - 142   2007.04  [Refereed]

Academic Journal  Multiple authorship

Study on Shaping Spherical Poly Crystalline Diamond Tool by Micro-Electro-Discharge Machining and Micro-Grinding with the Tool

Takeshi Masaki, Tsunemoto Kuriyagawa, Jiwang Yan and Nobuhito Yoshihara

International Journal of Surface Science and Engineering   1 ( 4 ) 344 - 359   2007.04  [Refereed]

Academic Journal  Multiple authorship

Development of Dresser for Resin Bonded Diamond Wheel

Hiroshi Matsuura, Kazuhiro Hane, Yasuhiro Kunieda, Nobuhito Yoshihara, Jiwang Yan and Tsunemoto Kuriyagawa

Key Engineering Materials   329   169 - 174   2007.04  [Refereed]

Academic Journal  Multiple authorship

Development of a New Laser Conditioning Method for Ultra-Fine Grit Diamond Wheels

Yasuhiro KUNIEDA, Hiroshi MATSUURA, Sohei KODAMA, Nobuhito YOSHIHARA, Jiwang YAN and Tsunemoto KURIYAGAWA

Key Engineering Materials   329   175 - 180   2007.04  [Refereed]

Academic Journal  Multiple authorship

Development of a Resin-Coated Micro Polishing Tool by Plasma CVD Method －Electrorheological fluid-assisted polishing of Tungsten carbide micro aspherical molding dies－

Tsuyoshi KAKU, Nobuhito YOSHIHARA, Jiwang YAN, Tsunemoto KURIYAGAWA, Kazuhiko ABIKO, Yoshiharu MIKAMI and Masahiro NOGUCHI

Key Engineering Materials   329   213 - 218   2007.04  [Refereed]

Academic Journal  Multiple authorship

DEVELOPMENT AND TRIBOLOGICAL PROPERTIES OF DIAMOND FILMS ON BRONZE, ALUMINA OR POLYAMIDE66 SUBSTRATE BY SPRAYING FINE DIAMOND PARTICLES

Takeshi Yamaguchi, Kentaro Miyazawa, Kei Shibata, Katsuhiko Takahashi, Nobuhito Yoshihara, Tsunemoto Kuriyagawa and Kazuo Hokkirigawa

Proceedings of the Third Asia International Conference on Tribology     381 - 382   2006.10  [Refereed]

Others  Multiple authorship

Nano-Topography on Axisymmetric Aspherical Ground Surface

Nobuhito Yoshihara, Tsunemoto Kuriyagawa and Hiromichi Ono

Int. J. Manufacturing Technology and Management   9 ( 43832 ) 51 - 63   2006.04  [Refereed]

Academic Journal  Multiple authorship

Electrorheological Fluid-Assisted Polishing of WC Micro Aspherical Glass Molding Dies

Tsuyoshi Kaku, Tsunemoto Kuriyagawa and Nobuhito Yoshihara

Int. J. Manufacturing Technology and Management   9 ( 43832 ) 109 - 119   2006.04  [Refereed]

Academic Journal  Multiple authorship

Powder Jet Deposition of Ceramic Films

N. Yoshihara, T. Kuriyagawa, Y. Yasutomi and K. Ogawa

Proceedings of The 3rd International Conference on Leading Edge Manufacturing in 21st Century     833 - 838   2005.10  [Refereed]

Others  Multiple authorship

Development of an electrorheological fluid-assisted polishing tool for micro-aspherical moding dies

T. Kaku, N. Yoshihara and T. Kuriyagawa

Proceedings of The 3rd International Conference on Leading Edge Manufacturing in 21st Century     871 - 876   2005.10  [Refereed]

Others  Multiple authorship

Machining of micro aspherical mould inserts

W.K.Chen, T.Kuriyagawa, H.Huang and N.Yosihara

Precision Engineering   29 ( 3 ) 315 - 323   2005.07  [Refereed]

Academic Journal  Multiple authorship

Improvement of Machined Surface Flatness in Ultra-Precision Plane Horning

S. Suzuki, N. Yoshihara and T. Kuriyagawa

Key Engineering Materials   291-292   359 - 364   2005.06  [Refereed]

Academic Journal  Multiple authorship

New Compensation Grinding of Axisymmetric Aspherical Lenses with High NA Value

N. Yoshihara, T. Kuriyagawa

Key Engineering Materials   291-292   51 - 56   2005.06  [Refereed]

Academic Journal  Multiple authorship

New technologies for aspherical grinding/polishing of micro/meso optics

Tsunemoto Kuriyagawa and Nobuhito Yoshihara

Proceedings of Optical Fabrication & Testing 2004   CD-ROM   2004.10  [Refereed]

Others  Multiple authorship

DEVELOPMENT OF FLUCTUATION-FREE ULTRA-PRECISION ASPHERICAL GRINDING METHOD FOR EXTREME PRECISE OPTICAL PARTS

N. YOSHIHARA, T. KURIYAGAWA and H. ONO

Proceedings of THE VIIth INTERNATIONAL CONFERENCE ON MONITORING AND AUTOMATIC SUPERVISION IN MANUFACTURING   CD-ROM   2004.08  [Refereed]

Others  Multiple authorship

Machining of Aspherical Molding Dies Utilizing Parallel Grinding Method (Continued Report) -Influence on the Processing Accuracy of the Setting Error of the Wheel and Investigation of Dressing Condition-

Masaru SAEKI, Katsuo SYOJI, Tsunemoto KURIYAGAWA and Nobuhito YOSHIHARA

Journal of the Japan Society for Precision Engineering   70 ( 8 ) 1065 - 1069   2004.08  [Refereed]

Academic Journal  Multiple authorship

Grinding Marks Generated on Axi-symmetric Aspherical Surface

Nobuhito YOSHIHARA, Katsuo SYOJI, Tsunemoto KURIYAGAWA and Masaru SAEKI

Journal of the Japan Society for Precision Engineering   70 ( 7 ) 972 - 976   2004.07  [Refereed]

Academic Journal  Multiple authorship

Formation of Vertical Striped Pattern on the Ground Surface in High-Reciprocation Profile Grinding (Continued report)

Nobuhito YOSHIHARA, Tsunemoto KURIYAGAWA and Katsuo SYOJI

Journal of the Japan Society for Precision Engineering   69 ( 12 ) 1792 - 1796   2003.12  [Refereed]

Academic Journal  Multiple authorship

Study of Parallel Grinding Method for Aspherical Optical Elements

Masaru Saeki, Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Wei Kian Chen and Katsuo Syoji

Proceedings of The 2nd International Conference on Leading Edge Manufacturing in 21st Centry     49 - 52   2003.11  [Refereed]

Others  Multiple authorship

Nano-topography Characterization of Axisymmetric Aspherical Surfaces

Tsunemoto KURIYAGAWA, Nobuhito YOSHIHARA and Katsuo SYOJI

Key Engineering Materials   238-239   125 - 129   2003.04  [Refereed]

Academic Journal  Multiple authorship

Formation of Vertical Striped Pattern on the Ground Surface in High-Reciprocation Profile Grinding

Tsunemoto KURIYAGAWA, Nobuhito YOSHIHARA, Yongbo WU and Katsuo SYOJI

Journal of the Japan Society for Precision Engineering   67 ( 8 ) 1316 - 1320   2001.08  [Refereed]

Academic Journal  Multiple authorship

EFFECT OF WHEEL REVOLUTIONAL SPEED ON STRIPED PATTERN ON SURFACES FINISHED BY HIGH-SPEED RECIPROCATION GRINDING

Nobuhito YOSHIHARA, Tsunemoto KURIYAGAWA, Katsuo SYOJI

Proceedings of the 10th International Conference on Precision Engineering     446 - 451   2001.07  [Refereed]

Others  Multiple authorship