論文 - 吉原　信人

Estimation of Grinding Conditions by Machine Learning

Nobuhito Yoshihara, Daiki Kobayashi, Kudai Matsumoto and Masahiro Mizuno

Advances in Abrasive Technology XXV     2023年12月  [査読有り]

国際的学術誌  共著・分担

低周波楕円振動を用いた歯車成形用金型の研磨に関する研究

小田 駿，林 幸明，吉原信人，西川尚宏，水野雅裕

砥粒加工学会誌   66 ( 11 ) 638 - 643   2022年11月  [査読有り]

学術誌  共著・分担

軸対称非球面研削における研削条件の最適化

吉原信人，嶋田慶太，水野雅裕，厨川常元

精密工学会誌   88 ( 2 ) 193 - 197   2022年02月  [査読有り]

学術誌  共著・分担

Optimization of Nano-topography Distribution by Compensation Grinding

N. Yoshihara, M. Mizuno

International Journal of Automation Technology   16 ( 1 ) 32 - 37   2022年01月  [査読有り]

学術誌  共著・分担

Effect of the abrasive grain distribution on ground surface roughness

N. Yoshihara, H. Takahashi, M. Mizuno

International Journal of Automation Technology   16 ( 1 ) 38 - 42   2022年01月  [査読有り]

学術誌  共著・分担

Roughness of Traverse Ground Surface

Nobuhito Yoshihara

Advanced Micro-Fabrication and Green Technology     2020年08月  [査読有り]

その他（含・紀要）  単著

Effect of the grinding efficiency on ground surface roughness

Nobuhito Yoshihara, Masaki Ono, Naohiro Nishikawa, Masahiro Mizuno

Advances in Abrasive Technology   22   2019年12月  [査読有り]

その他（含・紀要）  共著・分担

SUS316の超音波振動援用ドリル加工におけるバリ抑制効果

田口恭輔，吉原信人，原圭祐，水野雅裕

砥粒加工学会誌   63 ( 12 ) 624 - 629   2019年12月  [査読有り]

学会誌  共著・分担

Study on ultrasonic vibration assisted drilling of AISI 316 2nd report effect of ultrasonic vibration on the cutting temperature

Kyosuke Taguchi, Nobuhito Yoshihara, Keisuke Hara, Masahiro Mizuno

Advances in Abrasive Technology   21   2018年10月  [査読有り]

その他（含・紀要）  共著・分担

Comparison of machining performance between cutting tap and rolled tap in tapping of Inconel 718 superalloy

Masahiro Mizuno, Yuma Koseki, Nobuhito Yoshihara, Naohiro Nishikawa, Toshirou Iyama

Advances in Abrasive Technology   21   2018年10月  [査読有り]

その他（含・紀要）  共著・分担

Effect of the abrasive grain distribution on surface roughness

Nobuhito Yoshihara, Masaki Ono, NaohiroNishikawa, Masahiro Mizuno

Advances in Abrasive Technology   21   2018年10月  [査読有り]

その他（含・紀要）  共著・分担

Study on ultrasonic vibration assisted drilling of SUS316

Kyosuke Taguchi, Keisuke Hara, Nobuhito Yoshihara, Masahiro Mizuno

Advances in Abrasive Technology   20   489 - 494   2017年12月  [査読有り]

学術誌  共著・分担

Theoretical analysis of roughness of high-speed reciprocation ground surface

Nobuhito Yoshihara, Kazuki Ono, Naohiro Nishikawa, Masahiro Mizuno

Advances in Abrasive Technology   20   217 - 221   2017年12月  [査読有り]

学術誌  共著・分担

Grinding Characteristics of Waspaloy with High-Speed Reciprocation Grinding

Nobuhito Yoshihara, Yuta Fukuda, Masatsugu Houman, Naohiro Nishikawa, Masahiro Mizuno

Materials Science Forum   ( 874 ) 97 - 100   2016年10月  [査読有り]

学術誌  共著・分担

Development of a New Truing Device Based on Electro-Contact Discharge Machining for Metal Bond Grinding Wheels

Masahiro Mizuno, Akira Karibe, Nobuhito Yoshihara, Naohiro Nishikawa, Toshirou Iyama

Materials Science Forum   ( 874 ) 268 - 271   2016年10月  [査読有り]

学術誌  共著・分担

Development of the Electric Rust Preventive Machining Method System -New Generation System for High Performance Water Machining and Green Manufacturing-

Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno and Shinya Tsukamoto

Proceedings of the 8th MIRAI Conference     98 - 103   2015年03月  [査読有り]

その他（含・紀要）  共著・分担

Development of electric rust preventive machining method system – safe water using for machining fluid: complete removal of bacteria (Legionella pneumophila) and assay

N. Nishikawa, K. Omoe, K. Murakami, Y. Sato’o, T. Sawa, Y. Hagihara, N. Yoshihara, H. Okawai, T. Iyama, M. Mizuno, S. Tsukamoto

International Journal of Nanomanufacturing   10 ( 1/2 ) 185 - 200   2014年10月  [査読有り]

学術誌  共著・分担

Optimization of Grinding Conditions in Non-axisymmetric Aspherical Grinding

Nobuhito Yoshihara, Tomoharu Nakagawa, Naohiro Nishikawa and Masahiro Mizuno

Advanced Materials Research   1017   109 - 103   2014年08月  [査読有り]

学術誌  共著・分担

Development of Electric Rust Preventive Machining Method System -Image analysis and calculation on Particle Removal for Recycling Water-

Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno, Toshirou Iyama and Shinya Tsukamoto

Proceedings of ICPE2014     478 - 483   2014年07月  [査読有り]

その他（含・紀要）  共著・分担

Grinding characteristics of high-speed reciprocation profile grinding

Nobuhito Yoshihara, Kyohei Horoya, Naohiro Nishikawa, Masahiro Mizuno and Toshirou Iyama

Proceedings of the 7th International Conference on Leading Edge Manufacturing in 21st Century   7   519 - 522   2013年11月  [査読有り]

その他（含・紀要）  共著・分担