Published Papers - MIZUNO Masahiro
-
Study on lapping of gear molds using low-frequency elliptical tool motion
66 ( 11 ) 638 - 63 2022.11 [Refereed]
Academic Journal Multiple authorship
-
Study on ultrasonic vibration assisted drilling of SUS316
Kyosuke Taguchi, Keisuke Hara, Nobuhito Yoshihara, Masahiro Mizuno
Advances in Abrasive Technology 20 489 - 94 2017.12 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Theoretical analysis of roughness of high-speed reciprocation ground surface
Nobuhito Yoshihara, Kazuki Ono, Naohiro Nishikawa, Masahiro Mizuno
Advances in Abrasive Technology 20 217 - 221 2017.12 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Grinding Characteristics of Waspaloy with High-Speed Reciprocation Grinding
吉原信人，福田佑太，宝満正嗣，西川尚宏，水野雅裕
Advances in Abrasive Technology XIX 97 - 100 2016.10 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Development of a New Truing Device Based on Electro-Contact Discharge Machining for Metal Bond Grinding Wheels
水野雅裕，刈部聡，吉原信人，西川尚宏，井山俊郎
Advances in Abrasive Technology XIX 268 - 271 2016.10 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Optimization of Grinding Conditions in Non-axisymmetric Aspherical Grinding
Nobuhito YOSHIHARA, Tomoharu NAKAGAWA, Naohiro NISHIKAWA, Masahiro MIZUNO
Advanced Material Research 1017 109 - 113 2014.09 [Refereed]
Academic Journal Multiple authorship
非軸対称非球面の超精密研削における研削マークの発生機構を理論的に明らかにした。
-
Grinding characteristics of high-speed reciprocation profile grinding
Nobuhito Yoshihara, Kyohei Horoya, Naohiro Nishikawa, Masahiro Mizuno and Toshirou Iyama
Proceedings of the 7th International Conference on Leading Edge Manufacturing in 21st Century 7 519 - 522 2013.11 [Refereed]
Academic Journal Multiple authorship
-
Lapping of EDM-processed V-Groove Array Using Three-dimensional Tool Motion
水野雅裕，佐藤統隆，井山俊郎，吉原信人，西川尚宏
Proceedings of the 13th euspen International Conference 2013.05 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Optimal strategies for corrective assembly approach applied to
井山俊郎，水野雅裕，Kenneth N. McKay，吉原信人，西川尚宏
Computers in Industry 64 556 - 564 2013.03 [Refereed]
Academic Journal Multiple authorship
-
Effect of the grain depth of cut on cross sectional profile -Theoretical analysis of ground surface roughness-
Nobuhito Yoshihara, Hiroaki Murakami, Naohiro Nishikawa, Masahiro Mizuno and Toshirou Iyama
Advanced Materials Research 565 28 - 33 2012.09 [Refereed]
Academic Journal Multiple authorship
-
Roughness of high-speed reciprocation profile ground surface
吉原信人，袰屋恭平，西川尚宏，水野雅裕，井山俊郎
Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century 2011.11 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Lapping of EDM processed tool steel surfaces using modified figure-8 tool motion
水野雅裕，田中大介，井山俊郎，吉原信人，西川尚宏
Proceedings of the 11th euspen International Conference 2011.05 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Optimal Strategy for Producing a High Quality Relay in a Mashining-assembly Production System Applied a Corrective Assembly Approach
井山俊郎，水野雅裕，吉原信人，西川尚宏
Proceedings of the 11th euspen International Conference 2011.05 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Optimization of Nano-topography Distribution by Compensation of Grinding Conditions
吉原信人，西川尚宏，水野雅裕，井山俊郎，厨川常元
Proceedings of the 11th euspen International Conference 2011.05 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Nano-Topography Distribution on Non-Axisymmetric Aspherical Ground Surface, Advanced Material Research
吉原信人，藤村慎，西川尚宏，水野雅裕，井山俊郎
Advanced Material Research 325 66 - 71 2011.01 [Refereed]
Academic Journal Multiple authorship
-
高精度機械組立生産システムにおけるバッファを用いた修正組立法
井山俊郎，水野雅裕，Mckay, K. N. ，西川尚宏，川北智弥
生産工学国際ジャーナル 49 ( 10 ) 2745 - 2758 2010.10 [Refereed]
Bulletin of University, Institute, etc. Multiple authorship
-
Development of a Three-Dimensional Tool Oscillation System for Finishing Metal Molds
M. Mizuno, T. Iyama, X. Zhang, N. Nishikawa
Key Engineering Materials 389-390 302 - 307 2008.07 [Refereed]
Academic Journal Multiple authorship
-
Analysis of the Sawing Process with Abrasive Circular Saw Blades
M. Mizuno, T. Iyama, B. Zhang
ASME Journal of Manufacturing Science and Engineering 130 ( 1 ) 011012-1 - 011012-15 2008.02 [Refereed]
Academic Journal Multiple authorship
-
T. Iyama, M. Mizuno, K. N. McKay, M. Ito, J. Tamaki
Journal of Materials Processing Technology 183 277 - 283 2007.10 [Refereed]
Academic Journal Multiple authorship
-
Lapping of Electrical Discharge Machining Processed Tool Steel Surface Using Elliptical Tool Motion「（共著）」
M. Mizuno, T. Iyama, S. Sugawara, B. Zhang
ASME Journal of Manufacturing Science and Engineering 129 ( 3 ) 502 - 512 2007.06 [Refereed]
Academic Journal Multiple authorship