Published Papers - SUGIMOTO Yuma

Numerical Study on Joint Structure Details for Improving Slip Strength of High-Strength Bolted Joints Subjected to Shear and Tension

Soshi Kato, Yuma Sugimoto

Steel Construction Engineering ( Japanese Society of Steel Structures )  31 ( 124 ) 64 - 79   2025.01  [Refereed]

Academic Journal  Multiple authorship

Survey of Electrochemical Performance of Protective Rust on Weathering Steel

Hiroshi Onishi, Hiroki Oba, Shunta kido, Mio Matsukawa, Yuma Sugimoto

Proceedings of 35th Reliability Symposium ( The Society of Materials, Science, Japan )    32 - 37   2024.12

International Conference Proceedings  Multiple authorship

Measurement of Deformation in High-Strength Bolt Threads Using Image Analysis and FEM Modeling Method

Ryoma Kikuchi, Yuma Sugimoto

Proceedings of 35th Reliability Symposium ( The Society of Materials, Science, Japan )    32 - 37   2024.12

International Conference Proceedings  Multiple authorship

Influence of warp distortion of splice plates on slip capacity evaluation of high strength bolted frictional connection

Shion Kudo, Yuma Sugimoto, Toshikazu Takai

Proceedings of Constructional Steel   32   616 - 624   2024.11  [Refereed]

International Conference Proceedings  Multiple authorship

Analytical study of high-st of high-strength bolt tention joints with friction joints to improve ultimate performance

Ryoma Kikuchi, Yoichi Takeda, Yuma Sugimoto

Proceedings of Constructional Steel   32   633 - 642   2024.11  [Refereed]

International Conference Proceedings  Multiple authorship

Numerical study for expanding the application range of prying force calculation formula

Soshi Kato, Yuma Sugimoto

Proceedings of Constructional Steel   32   651 - 657   2024.11  [Refereed]

International Conference Proceedings  Multiple authorship

Simple modeling for finite element analysis evaluates mechanical behavior of bolted connection

Toshikazu Takai, Ryo Sakura, Hitoshi Moriyama, Yuma Sugimoto, Gen Hayashi, Takashi Yamaguchi

Proceedings of Constructional Steel   32   658 - 671   2024.11  [Refereed]

International Conference Proceedings  Multiple authorship

Effect of thread modeling on the evaluation of ultimate behavior of high strength bolts subjected to bending and tension

Ryoma Kikuchi, Yoichi Takeda, Yuma Sugimoto

Proceedings of Constructional Steel   32   633 - 642   2024.11  [Refereed]

International Conference Proceedings  Multiple authorship

Fundamental Study for Slip Resistance Improvement of High-Strength Bolted Joints Subjected to Shear and Tension

Yuma Sugimoto, Soshi Kato

International Journal of Steel Structures ( Korean Society of Steel Construction )    2024.11  [Refereed]

Academic Journal  Multiple authorship

DOI

Numerical Analysis of High- Strength Bolted Frictional Joints with Multi-Splice- Plates for Enhanced Energy Absorption Capacity

Yuma Sugimoto

The 18th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-18)     2024.11  [Refereed]

International Conference Proceedings  Single Work

Mechanical behaviors of combined friction and bearing type bolted joints with adjustment plates

Shuto Yoshida, Yuma Sugimoto, Tetsuo Akatani, Tsutomu Kitanaka, Rina Araki

The 18th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-18)     2024.11  [Refereed]

International Conference Proceedings  Multiple authorship

Estimation of web plate stress in a flush endplate connection with horizonal stiffeners

Shion Kimura, Yuma Sugimoto

The 18th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-18)     2024.11  [Refereed]

International Conference Proceedings  Multiple authorship

Modeling techniques of end sway bracings for simplifying FE models of full scale bridges

Takuto Hirakawa, Yuma Sugimoto, Hiroshi Onishi

The 18th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-18)     2024.11  [Refereed]

International Conference Proceedings  Multiple authorship

A study of the effect of skew angle on natural frequencies of bridge girders

M. Satomi, R. Handa, Y. Sugimoto, H. Onishi

International Association for Bridge Maintenance and Safety     2144 - 2152   2024.07  [Refereed]

International Conference Proceedings  Multiple authorship

EFFECTS OF HOLE MISALIGNMENT AND AXIAL FORCE OF ORDINARY BOLTS ON MECHANICAL BEHAVIOR AND RESIDUAL DEFORMATION OF STEEL EARTH RETAING BEAM JOINTS

Yuma Sugimoto

( Japanese Society of Steel Structures )  31 ( 121 ) 43 - 55   2024.03  [Refereed]

Academic Journal  Single Work

DOI

Numerical study on mechanical performance of earth-retaining beam connections with cast iron components for rapid construction

Yuna Kon, Yuma Sugimoto, Hiroshi Onishi

Proceedings of the 12th International Symposium on Steel Structures     107 - 110   2023.11  [Refereed]

International Conference Proceedings  Multiple authorship

Pilot study of a repair method of corroded steel girder end for buckling resistance improvement and fatigue crack prevention

Yuma Sugimoto

Proceedings of the 12th International Symposium on Steel Structures     397 - 400   2023.11  [Refereed]

International Conference Proceedings  Single Work

Numerical Study on Applicability of Stress Amplitude Ratio in Detecting Fatigue Cracks at Bases of Stiffened Cylindrical Steel Column Appendages

Yuto Asano, Yuma Sugimoto, Hiroshi Onishi

Proceedings of the 12th International Symposium on Steel Structures     369 - 372   2023.11  [Refereed]

International Conference Proceedings  Multiple authorship

Investigation of Displacement Measurement Method Using DIC for High-Strength Bolt Thread under Tensile Load

Ryoma Kikuchi, Yuma Sugimoto, Hiroshi Onishi

Proceedings of the 12th International Symposium on Steel Structures     287 - 290   2023.11  [Refereed]

International Conference Proceedings  Multiple authorship

Slip strength improvement of high-strength bolted joints subjected to shear and tension with FEM

Soshi Kato, Yuma Sugimoto, Hiroshi Onishi

Proceedings of the 12th International Symposium on Steel Structures     2023.11  [Refereed]

International Conference Proceedings  Multiple authorship

EFFECT OF GIRDER CONFIGURATIONS AND HORIZONTAL STIFFENER THICKNESS ON STRENGTH AND STIFFNESS OF HIGH STRENGTH BOLTED FLUSH END PLATE CONNECTIONS

Yuma Sugimoto, Takashi Yamaguchi

Japanese Journal of JSCE,   79 ( 6 ) 1 - 14   2023.06  [Refereed]

Academic Journal  Multiple authorship

DOI

Soundness evaluation of small-scale bridge decks with portable FWD tests

Taichi Sasaki, Atsuya Tsuboi, Yuma Sugimoto, Haruto Kakeda, Hiroshi Onishi

Life-Cycle of Structures and Infrastructure Systems     3824 - 3831   2023.06  [Refereed]

International Conference Proceedings  Multiple authorship

The ratio of stress amplitudes between two directions around welded part of trough rib in orthotropic decks with fatigue cracks

Ryo Saita, Mone Ueno, Yuma Sugimoto, Hiroshi Onishi

Life-Cycle of Structures and Infrastructure Systems     841 - 848   2023.06  [Refereed]

International Conference Proceedings  Multiple authorship

Improvement of stiffener configuration to strengthen tensile type joints with long bolts applied to bridge main towers

Yuma Sugimoto

IABSE Symposium,Istanbul 2023: Long Span Bridges     2023.04  [Refereed]

International Conference Proceedings  Single Work

Experiment of high strength-bolted flush end plate connections with varying existing and length of horizontal stiffeners

Yuma Sugimoto, Takashi Yamaguchi

  69   406 - 418   2023.03  [Refereed]

International Conference Proceedings  Multiple authorship

DOI

TIELD MECHANISM OF JOINTS BETWEEN STEEL-EARTH RETAINING BEAMS SUBJECTED TO WEAK AXIAL BENDING

Yuma Sugimoto, Tomohiro Taniguchi, Sota Yamamoto, Koji Mastuoka, Takashi Yamaguchi

Proceedings of Constructional Steel   30   662 - 673   2022.11  [Refereed]

Academic Journal  Multiple authorship

BENCHMARK MODEL FOR 3D-FE ANALYSIS OF HIGH STRENGTH BOLTED SPLIT-TEE JOINT

Yuma Sugimoto, Takashi Yamaguchi

    2022.09  [Refereed]

Academic Journal  Multiple authorship

DOI

Development of Ductile Cast Iron Components to Shorten On-site Assembly of Existing Steel Earth-Retaining Beams

Yuma Sugimoto, Yugo Shirai, Takashi Yamaguchi

Symposium Prague 2022 ( International Association for Bridge and Structural Engineering )    196 - 202   2022.05  [Refereed]

Bulletin of University, Institute, etc.  Multiple authorship

Mechanical behavior of connection between steel earth-retaining beams without compression side splice plate

Yugo Shirai, Yuma Sugimoto, Tomohiro Taniguchi, Sota Yamamoto, Koji Matsuoka, Takashi Yamaguchi

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  68   481 - 493   2022.03  [Refereed]

Academic Journal  Multiple authorship

DOI

Analytical study on estimating bolt axial force of flush endplate connection

Yuma Sugimoto, Takashi Yamaguchi

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  67   398 - 411   2021.03  [Refereed]

Academic Journal  Multiple authorship

DOI

Effect on strength improvement of stiffener on tensile type bolted joints with multiple high strength bolt rows

Yuma Sugimoto, Takashi Yamaguchi

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  67   309 - 322   2021.03  [Refereed]

Academic Journal  Multiple authorship

DOI

ANALYTICAL STUDY ON THE SECTIONAL FORCE OF HORIZONTAL STIFFENER FOR HIGH STRENGTH BOLTED END PLATE CONNECTION

Yuma SUGIMOTO, Yuki MINEYAMA, Takashi YAMAGUCHI

Journal of Japan Society of Civil Engineers, Ser. A1 ( Japan Society of Civil Engineers )  77 ( 1 ) 28 - 41   2021.02  [Refereed]

Academic Journal  Multiple authorship

DOI

PROPOSAL OF YIELD STRENGTH FORMULA FOR HIGH STRENGTH BOLTED SPLIT TEE JOINTS BY 3D-FE MODEL

Yuma Sugimoto, Takashi Yamaguchi

Steel Construction Engineering ( Japan Society of Steel Construction )  27 ( 108 ) 67 - 81   2020.12  [Refereed]

Academic Journal  Multiple authorship

Analytical study on bending strength of the double end plate connection inserting a filler plate

Yuki Mineyama, Yuma Sugimoto, Keiya Sugita, Hirotoshi Azuma, Keizo Egashira, Takashi Yamaguchi

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  66   106 - 113   2020.06  [Refereed]

Academic Journal  Multiple authorship

DOI

STUDY ON BENDING STRENGTH AND EVALUATION OF BOLT AXIAL FORCE FOR THE DOUBLE END PLATE CONNECTION WITH HORIZONTAL RIBS

Yuki MINEYAMA, Yuma SUGIMOTO, Takashi YAMAGUCHI

Steel Construction Engineering ( Japan Society of Steel Construction )  27 ( 106 ) 61 - 74   2020.03  [Refereed]

Academic Journal  Multiple authorship

DOI

Development of an Emergency Bridge with the Double End Plate Connection Using High Strength Bolt

Yuki Mineyama, Yuma Sugimoto, Keiya Sugita, Takashi Yamaguchi

16TH East Asia-Pacific Conference on Structural Engineering and Construction Report     385 - 394   2019.12  [Refereed]

Bulletin of University, Institute, etc.  Multiple authorship

DOI

Study on effective reinforcement methods for fatigue cracks of floor beam which bolted to main structure

Kohei Funayama, Yuma Sugimoto, Takashi Yamaguchi, Yasuo Suzuki, Kunitomo Sugiura

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  65   506 - 515   2019.03  [Refereed]

Academic Journal  Multiple authorship

DOI

Yuki Mineyama, Yuma Sugimoto, Hirotoshi Azuma, Keizo Egashira, Keiya Sugita, Takashi Yamaguchi

Yuki Mineyama, Yuma Sugimoto, Hirotoshi Azuma, Keizo Egashira, Keiya Sugita, Takashi Yamaguchi

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  65   351 - 364   2019.03  [Refereed]

Academic Journal  Multiple authorship

DOI

Structural Development of Tensile Type Bolted Connections for Temporary Emergency Bridge Focusing on Rapid Election

Yuma Sugimoto, Takashi Tamaguchi, Yuki Mineyama

40th IABSE Symposium(Nantes) Reports ( International Association for Bridge and Structural Engineering )    49 - 56   2018.09  [Refereed]

Bulletin of University, Institute, etc.  Multiple authorship

DOI

Study on the effect of stiffener and bolt position on joint strength of high strength bolted tensile joint by FEM analysis

Yuma Sugimoto, Yuki Mineyama, Takashi Yamaguchi

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  64   605 - 616   2018.03  [Refereed]

Academic Journal  Multiple authorship

DOI

Experimental Study on the connection detail for the temporary emergency bridge utilizing temporary work girders

Yuki Mineyama, Yuma Sugimoto, Hirotoshi Azuma, Keizo Egashira, Keiya Sugita, Takashi Ymaguchi

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  64   591 - 604   2018.03  [Refereed]

Academic Journal  Multiple authorship

DOI

Structural rationalization of bolted tensile joint details for the emergency temporary bridge focusing on easy construction by FEM

Yuma Sugimoto, Yuki Mineyama, Keizo Egashira, Takashi Yamaguchi

Journal of Structural Engineering, A ( Japan Society of Civil Engineers )  63   739 - 748   2017.03  [Refereed]

Academic Journal  Multiple authorship

DOI